An assembly of micro tube of required length and micro tube holding stake.
Tubing manufactured from virgin polyethylene, with yellow line.
Resistant to ultra violet (UV) radiation and other environmental effects.
Snap proof design, tubing is prevented from snapping off even at higher pressures.
Designed to hold the dripper at a fixed position.
The flow is dispersed to avoid soil erosion due to jetting.
Smooth inner surface minimises frictional losses.
Can be used at low operating pressure.
Can be supplied in required length of tubing.
Applications
Used as a linear flow dripper in drip systems.
Recommended to use with low pressure / gravity fed system like drum kit, bucket kit, gravity kit etc.
Suitable to use for irrigation of bag culture.
Technical Specifications
Flow for 1m Length
Inside Diameter
Nominal Outside Diameter
Wall Thickness
gph
mm
mm
mm
mm
14.0
3.7
1.2
3.00
0.90
24.0
6.4
1.5
3.30
0.90
* For detailed code, please refer ordering specifications.
Ordering Specifications
MD
XX
Nominal ID x10
Example: MD12 - This code refers to Micro Dripper of inside diameter 1.2 mm and length of tube 100 cm. Note: Micro Dripper is also available with microtube holding stake. Please specify the code as MTS for separate microtube holding stake.