Sand Separator - Jain Hydro cyclone Filter

Features and Specifications:

• Mild steel construction.

• Coated with more than 70 micron thick deep blue coloured epoxy powder from both inside and outside surface for protection against corrosion and weather effects.

• Hydrodynamically designed to create maximum centrifugal action to separate particles heavier than water

• Efficiently removes fine sand and silt particles of size higher than 75 microns and specific gravity more than 2.65.

• Special protection plate are provided at the bottom of the cone to prevent wearing.

• Large volume of dirt collection chamber increases flushing interval.

• Dirt can be easily flushed out through dirt collection chamber.

• Available in maximum operating pressure of 10 kg/cm²
  (142 psi).
  

• Standard end connections are BSP flanged. Please specify for other end connections. (ANSI flanged or Easy-Fix™).

• Recommended to install before media/screen filters to remove particles heavier than water.

• Improves operational efficiency & life of media / screen filters.

• Can also be supplied in stainless steel as a special order.

• Can be supplied in higher flow capacities in multiple batteries option.

Applications:

• Used in micro irrigation systems to remove sand and silt particles from irrigation water.

Technical Specifications :

Clean Pressure Drop for Jain Hydro-cyclone Filter:

Note: Tested under standard testing conditions.

Ordering Specifications:

Example: DJHFM025 - This code represents Jain Hydrocyclone Filter - Deluxe with mild steel construction having 25 m³/hr nominal flow capacity.

• Jain Hydrocyclone Filter of any other size, flow capacity or end connections can be supplied on demand.
• Jain Hydrocyclone Filter can be supplied in Autoflush option. Please specify code as DJHFM025A instead of DJHFM025.